Power grid · Instrument
Switch
Cuts or restores power to part of the factory, with one click.
What it's for
The switch is a small lever box that connects between a source and what it feeds. Closed, power flows; open, everything behind it is cut off. Handy for stopping a chain without dismantling anything, or for running a big machine only on demand.
How it works
- Right-click without a wire: the lever flips. When open, it lets nothing through, neither by its lines nor by the wires and machines touching it.
- It takes 4 lines up to 30 blocks, like an outlet: the first line comes from the source, the following ones go to what it must feed.
- Wire in hand: click the switch then the source (a pole), then the switch again and what it feeds (a machine or a pole).
Placing and hookups
- 1 block
- It is placed against the target block: on the ground, on a wall or under a ceiling. On the ground or ceiling, the wrench rotates it; on a wall, it does not rotate.
- It has no collision and breaks in one hit, like a lever; it then returns its wire.
Its panel
- The right-click operates the lever: its panel opens with sneak + right-click.
- Lines card: its lines and the CONNECTED TO list. Controls card: open or close, and “Unplug everything” (with confirmation).
- Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.
Crafting
Switch
- L
Lever - W
Copper Wire - P
Iron Plate - R
Redstone Dust
In the chain
- Used to craft
Priority Switch