Contents

Power grid · Instrument

Wall Outlet

A small pole to fix to a wall, ceiling or floor, where a pole does not fit.

Wall Outlet, 3D render

What it's for

The wall outlet does the job of a PylonPylon inside a building: a plate with four insulators, placed against a wall, under a ceiling or on the floor, that receives 4 / 10 Power WirePower Wire lines up to 30 / 45 blocks. Placed on a factory wall, it brings the line from outside to the machines inside.

How it works

  • Wire in hand, click the outlet then the other end (a pole, another outlet, a SwitchSwitch or a machine), or the other way round: the line is strung. Each line takes its own insulator, on the side it leaves from.
  • Mk.2 (“Mk.2 Machines” research): a blue plate with eight insulators, which takes more lines and strings them farther. Between a Mk.2 outlet and a pole, the line goes as far as the longer of the two reaches.
  • It also conducts the power of the wires and machines touching it.
  • Like a pole, its panel can switch it off or disconnect all its lines.

Tiers

Mk.1

Wall Outlet

Range
30 blocks
Lines
4

From the start

Mk.2

Wall Outlet Mk.2

Range
45 blocks
Lines
10

Upgrade of the Wall Outlet Research: Mk.2 Machines Nexus P3

Placing and hookups

  • 1 block
  • It is placed against the target block: on a wall, under a ceiling or on the floor. On the floor or ceiling, the wrench rotates it a quarter turn.
  • It has no collision and breaks in one hit; it then returns its wire.

Its panel

  • Lines card: the number of lines and the CONNECTED TO list. Controls card: “Switch off / Switch on” and “Unplug everything” (with confirmation).
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Unlocking

Tips

Common mistakes