Power grid · Instrument
Priority Switch
A switch that opens by itself when power runs short: it sacrifices the least important.
What it's for
When a grid does not produce enough, all its machines slow down together. The priority switch prevents that: it cuts what it feeds as soon as the grid covers less than a threshold (90% for a new switch), or its batteries fall too low. The rest of the factory keeps all its power. Put behind it what can wait: recycler, electrolyser, charger, lighting.
How it works
- It is placed and connected like the
Switch: the first line comes from the source, the following ones go to what it feeds. - Supply threshold: it opens when the grid covers less than this percentage of demand (“never” at zero).
- Battery threshold: it opens when the grid's batteries fall below this percentage (disabled by default).
- Both thresholds are set in steps of 10%.
- Automatic: it closes again by itself, after 30 s at least, when the source can cover everything again and its batteries are 10 points above the threshold. Breaker: it stays open until a player closes it.
- A right-click toggles it by hand, like a switch; opened by hand, it does not close by itself.
What its panel says
- Like a switch: one line from the source, then the lines to what it powers.
- Opens by itself when the network runs short of power, or when its batteries run low.
In-game model
An animated model of the machine opens in game, in a window, step by step. Here is what it shows.
-
Step 1 · Placing
Placed against a block (floor, wall, ceiling), connected by lines like the switch.
-
Step 2 · The source
The first line strung must come from the source: that is the side it watches before closing again.
-
Step 3 · Behind it
The next lines go to what it feeds: the least important things.
-
Step 4 · Thresholds
Two thresholds in the panel: demand covered by the network, and batteries.
-
Step 5 · It opens
Power runs short: it opens and cuts what it feeds. The rest is spared.
-
Step 6 · It closes
Automatic: it closes itself once the source is enough. Breaker: by hand.
-
Step 7 · Tiers
Several switches with different thresholds make tiers of priority.
To open it in game:
- Shift + right click the item in your inventory, then “See the model”.
- The eye in the title bar of the machine's panel.
- The command
/maquette priority_switch.
Placing and hookups
- 1 block
- It is placed against the target block: on the ground, on a wall or under a ceiling. Red handle.
- First string the line from the source, then those to the machines to cut: it is the first line that tells it where the source is.
Its panel
- Its panel opens with sneak + right-click.
- Controls card: minus and plus for the supply threshold, minus and plus for the battery threshold, “Automatic / Breaker”, open or close, and “Unplug everything”.
- Its status says whether it is closed, opened by hand, or opened by itself and why; in breaker mode, opened by itself, an alert follows after a minute (in automatic mode, cutting is its job: no alert).
- Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.
Crafting
Priority Switch
- K
Electronic Chip - R
Redstone Dust - S
Switch - P
Steel Plate
Unlocking
Priority Switch
- Research topic
- Instruments
- Given by the Nexus
- P2 · Steel
Milestone "Electronics" (P2 · Steel)