Industrial
Fluids and oil
Pipes, tanks, pumps, the oil chain and hydrogen.
Pipes and refining
Fluids and oil
Pumps, pipes, tanks and machines that touch each other form a fluid network. A network carries only one fluid: water, crude oil, petrol or hydrogen. If two fluids meet in it, everything jams until one is removed.
-
Pump
Draws water from a neighbouring water block and pushes it into the pipes.
Extraction
10 kW
-
Copper Pipe
Connects pumps, tanks and machines: it carries water, oil, petrol or hydrogen.
Instrument
No power
-
Tank
Keeps a fluid in reserve: water, crude oil, petrol or hydrogen.
Storage
Mk.1 – Mk.2
No power
-
Oil Deposit
A pool of bitumen in a mound of soaked earth: the crude oil reserve.
Deposit
-
Oil Derrick
Pumps crude oil from a deposit and pushes it into the pipes.
Extraction
40 kW
-
Refinery
Turns crude oil into petrol, and gets plastic out of it along the way.
Processing
60 kW
-
Diesel Generator
Lots of power for a trickle of petrol: the engine of the oil factory.
Power
160 kW
-
Electrolyser
Turns water into hydrogen using power: energy to put in reserve.
Processing
40 kW
-
Fuel Cell
Turns stored hydrogen back into power: the factory's gas battery.
Power
30 kW
The oil chain
- The
prospector points to the nearest deposit. Deposits are those of your factory's map. - The Oil Derrick is placed on the deposit's centre block and pumps 2 L/s of crude (1 L/s below 20% of reserve).
- The Refinery turns 1 L/s of crude into 0.6 L of petrol and 1 plastic every 10 L. Crude goes in through the two bottom blocks, petrol comes out through the two top ones: the two networks must not touch.
- Petrol feeds the Diesel Generator (160 kW) or fills jerrycans of 20 L. Plastic is used for casings, the jetpack and the suit.
Hydrogen
The Electrolyser turns 1 L/s of water into 1 L/s of hydrogen for 40 kW; the Fuel Cell draws 30 kW from it. With a tank in between, the day's surplus is used at night, losing a quarter of the energy.