Contents

Storage

Tank

Keeps a fluid in reserve: water, crude oil, petrol or hydrogen.

Tank, 3D render
  • No power
  • Multiblock 1 block on the ground, 2 high (3 for the Mk.2)

What it's for

The tank is the fluid battery: it keeps what the machines do not consume and gives it back when production falls short. 8,000 / 32,000 L of a single fluid depending on the tier, with the level visible over its whole height. A petrol tank also fills jerrycans. No power needed.

How it works

  • It connects to a pipe network and takes by itself what the network has in excess; as soon as the producers can no longer keep up, it gives back its contents.
  • On the same network, the lowest tanks fill first and the highest ones empty first.
  • One fluid at a time: if it holds water, it cannot receive petrol. Two fluids meeting block the whole network.
  • Jerrycans (petrol tank): an empty Empty JerrycanEmpty Jerrycan placed in its left slot comes out full (20 L) on the right; a Jerrycan of PetrolJerrycan of Petrol placed on the left empties into it.
  • Tiers: the Mk.2 is taller and holds far more.

In-game model

An animated model of the machine opens in game, in a window, step by step. Here is what it shows.

  1. Tank, model, step 1: Placing

    Step 1 · Placing

    It holds 8,000 L of a single fluid: water, crude oil, petrol or hydrogen. No power needed.

  2. Tank, model, step 2: Filling

    Step 2 · Filling

    On a network, it takes on its own whatever the machines leave.

  3. Tank, model, step 3: Giving back

    Step 3 · Giving back

    When the producers fall short, it gives what it holds back to the machines of the network.

  4. Tank, model, step 4: The Mk.2

    Step 4 · The Mk.2

    The Mk.2 is taller and holds far more.

  5. Tank, model, step 5: Jerricans

    Step 5 · Jerricans

    Full of petrol, it fills jerricans: an empty one put in TO FILL comes out full in READY.

  6. Tank, model, step 6: Good to know

    Step 6 · Good to know

    Taken down, it loses what it holds. “Empty the tank” throws it all away, after a confirmation.

To open it in game:

  • Shift + right click the item in your inventory, then “See the model”.
  • The eye in the title bar of the machine's panel.
  • The command /maquette tank.

Capacity

What each tier holds.

Mk.18,000 L
Mk.232,000 L
  • One jerrycan20 L

Tiers

Mk.1

Tank

Capacity
8,000 L
One jerrycan
20 L
Factory value
100

Research: Fluids Nexus P2

Mk.2

Tank Mk.2

Capacity
32,000 L
One jerrycan
20 L
Factory value
250

Upgrade of the Tank Research: Mk.2 Machines Nexus P3

Placing and hookups

  • 1 block on the ground, 2 high (3 for the Mk.2)
  • No power
  • Multiblock 1 block on the ground, 2 high (3 for the Mk.2)
  • Two blocks high, three for the Mk.2. The grey connections are drawn on both its sides: it takes and it gives. A Copper PipeCopper Pipe against any face connects too.
  • It does not draw power and does not conduct it.
  • Tanks placed when they were only one block high keep their old size: dismantle and replace them for the new model.

Its panel

  • Fill card: the percentage and the fluid. Jerrycans card: the TO FILL and READY slots, with stock, free room and capacity in litres.
  • Actions card: “Empty the tank”, which discards all its contents, after confirmation.
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Unlocking

In the chain

Tips

Common mistakes