Contents

Storage · Instrument

Copper Pipe

Connects pumps, tanks and machines: it carries water, oil, petrol or hydrogen.

Copper Pipe, 3D render
  • No power

What it's for

The copper pipe circulates fluids between the machines that produce them, those that store them and those that consume them. It connects itself in all six directions, and its porthole takes the colour of what flows through it. One rule to remember: one fluid per network.

How it works

  • Pumps, derricks, pipes, tanks and machines that touch form a fluid network.
  • The network gives machines what they ask for; what is left goes into the tanks, and the tanks fill in what is missing.
  • A network carries only one fluid. If two fluids end up in it, everything blocks until one of the two is removed.
  • Machines that take one fluid and give another (refinery, electrolyser) have an input and an output on different blocks: each one is its own network.

In-game model

An animated model of the machine opens in game, in a window, step by step. Here is what it shows.

  1. Copper Pipe, model, step 1: Placing

    Step 1 · Placing

    Lay it end to end: it connects by itself in all six directions. The wrench changes nothing.

  2. Copper Pipe, model, step 2: The network

    Step 2 · The network

    Pumps, pipes, tanks and machines that touch make up a fluid network.

  3. Copper Pipe, model, step 3: Sight glass

    Step 3 · Sight glass

    Its sight glass takes the colour of what runs in it. Dry, it stays dark.

  4. Copper Pipe, model, step 4: Two lines

    Step 4 · Two lines

    A petrol line next to it: one block apart, and the two networks do not touch.

  5. Copper Pipe, model, step 5: Blocked

    Step 5 · Blocked

    Two fluids that meet block the whole network, until the pipe that joins them is removed.

  6. Copper Pipe, model, step 6: Good to know

    Step 6 · Good to know

    It neither takes nor carries power: it carries fluids only.

To open it in game:

  • Shift + right click the item in your inventory, then “See the model”.
  • The eye in the title bar of the machine's panel.
  • The command /maquette pipe.

Placing and hookups

  • 1 block
  • No power
  • Place it end to end: it connects itself to the pumps, tanks, machines and other pipes that touch it. The wrench changes nothing here.
  • On machines, the drawn flanges show where to connect: blue for an input, orange for an output, grey on a tank. A pipe against a flange lines up with it; against another face of the same block, it connects too.
  • It does not draw power and does not conduct it.

Its panel

  • Its panel says what it carries, or “Dry”, and summarises the network: supplied, demanded and reserve.
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Copper Pipe

Copper Pipe

Industrial WorkbenchResearch: Fluids

Unlocking

Copper Pipe

Research topic
Fluids
Given by the Nexus
P2 · Steel
Milestone "Fluids" (P2 · Steel)
To deposit
Steel Tube32Tempered Glass16Electric Motor4

In the chain

Tips

Common mistakes