Contents

Extraction

Mining Laser

Brings up every ore beneath it down to the bottom of the world, without digging a hole.

Mining Laser, 3D render

What it's for

The mining laser does not dig: its beam sweeps, block after block, the columns beneath it over 5 blocks on a side, down to the bottom of the world, and brings up every ore it meets, replacing it with stone. The terrain stays intact, but the underground is emptied of its ores. Power-hungry (300 kW), it finishes its work and is then useless at that spot.

Mining Laser 300 kW

Feeds

How it works

  • It examines the blocks layer after layer, starting from beneath itself; each ore is replaced by stone (or deepslate) and goes up into its nine slots.
  • Ores drop as with an unenchanted netherite pickaxe: raw ore, coal, redstone, diamonds...
  • It skips machine blocks and respects protected areas.
  • It consumes 300 kW while sweeping. When the chunk around it is not loaded, it goes “Paused” and consumes nothing.
  • When it has swept everything, its status reads “Done”: dismantle it and place it elsewhere to start again. A SensorSensor touching it can signal this to you.

What its panel says

  • Brings up the ores of the 5 x 5 columns below it, without digging.

In-game model

An animated model of the machine opens in game, in a window, step by step. Here is what it shows.

  1. Mining Laser, model, step 1: Placing

    Step 1 · Placing

    The mining laser stands on the ground. It digs nothing: its beam seeks the ores below.

  2. Mining Laser, model, step 2: Its columns

    Step 2 · Its columns

    It sweeps the 5 × 5 columns under it, layer by layer, down to the bottom of the world.

  3. Mining Laser, model, step 3: Power

    Step 3 · Power

    It draws 300 kW while sweeping: hungry! Without power, it stops.

  4. Mining Laser, model, step 4: The ores

    Step 4 · The ores

    Each ore it finds comes up into the laser, and rock takes its place. A belt leaving it empties it.

  5. Mining Laser, model, step 5: Outside

    Step 5 · Outside

    What lies outside its columns stays put, as do machine blocks and deposits.

  6. Mining Laser, model, step 6: Clogged

    Step 6 · Clogged

    No room left in its output: it waits until it is emptied.

  7. Mining Laser, model, step 7: Done

    Step 7 · Done

    No ore left below? Done for good: move it elsewhere.

To open it in game:

  • Shift + right click the item in your inventory, then “See the model”.
  • The eye in the title bar of the machine's panel.
  • The command /maquette laser_drill.

Placing and hookups

  • 1 block
  • A block, placed on the surface above the area to empty.
  • A belt whose back touches it carries away its ores; otherwise, its nine slots fill up and it stops.
  • It needs a solid grid: contact with a big source, or a PylonPylon line.

Its panel

  • Output card: its fullest slots, “Take” and “Slots”. Sweep card: progress as a percentage and the number of ores brought up.
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Unlocking

In the chain

Feeds
Crusher

Tips

Common mistakes