Contents

Logistics

Item Link

Teleports items from one end of the map to the other, from a sender to a receiver.

Item Link, 3D render

What it's for

The item link connects two points with no belt at all: the sender sends one stack at a time to the receiver on the same channel (a transfer takes 1 s), anywhere in the same world. A distant mine can thus feed the main factory. There are 99 channels, to run several links at once.

How it works

  • Each link is a sender or a receiver, your choice in its panel, on one of the 99 channels.
  • The sender sends the stack from its left slot to a receiver on the same channel that has room in its right slot.
  • Both ends consume 2 kW all the time; the sender takes 20 kW more during a transfer.
  • Each end needs at least 90% of power: below that, the link is “Powered off” and nothing leaves.
  • Several receivers on a channel: the sender sends to one of those that have room.

What its panel says

  • One stack per second to the receiver on the same channel.

In-game model

An animated model of the machine opens in game, in a window, step by step. Here is what it shows.

  1. Item Link, model, step 1: The sender

    Step 1 · The sender

    Sender or receiver, chosen in its panel: the sender beams the stack in its input slot.

  2. Item Link, model, step 2: Input

    Step 2 · Input

    A belt or an arm drops the item in: only the sender accepts it.

  3. Item Link, model, step 3: The receiver

    Step 3 · The receiver

    The receiver holds it in its output slot: a belt starting from it carries it off.

  4. Item Link, model, step 4: The channel

    Step 4 · The channel

    Sender and receiver must be on the same channel, set in their panel.

  5. Item Link, model, step 5: Power

    Step 5 · Power

    Each end needs power: a little while idle, and the sender much more while sending.

  6. Item Link, model, step 6: Sending

    Step 6 · Sending

    One stack at a time, within the same world, if a receiver on the channel is on and free.

  7. Item Link, model, step 7: Stuck

    Step 7 · Stuck

    Receiver off or full: “no free receiver”. The sender keeps its item.

To open it in game:

  • Shift + right click the item in your inventory, then “See the model”.
  • The eye in the title bar of the machine's panel.
  • The command /maquette item_link.

Placing and hookups

  • 1 block
  • A block. A belt ending against the sender fills it; a belt leaving from the receiver empties it.
  • Each end needs power: place it against a powered machine, or connect it to a PylonPylon.

Its panel

  • Controls card: “Sender / Receiver”, “Previous channel” and “Next channel” (with x10 to jump by tens), and the chosen channel.
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Unlocking

In the chain

Objectives that require it

Tips

Common mistakes