Contents

Production · Processing

Charger

Recharges electric tools: pickaxes, chainsaw, jetpack, headlamp.

Charger, 3D render

What it's for

Electric tools hold a charge, shown by their durability bar, and the charger refills it. Put the tool on the left, it comes out full on the right. It needs 50 kW while recharging: it is one of the big power draws of a small factory, but only for as long as it takes to recharge.

In

Electric PickaxeChainsawJetpackHeadlamp
Charger 50 kW

How it works

  • It recharges the Electric PickaxeElectric Pickaxe, the Electric Pickaxe Mk.2Electric Pickaxe Mk.2, the Electric Pickaxe Mk.3Electric Pickaxe Mk.3, the ChainsawChainsaw, the JetpackJetpack and the HeadlampHeadlamp.
  • One tool at a time: put it in the left slot (by hand, with “Load”, by belt or by arm). When full, it moves to the right slot, if that one is free.
  • It only consumes while recharging; a tool that is already full goes straight to the right.
  • Recharge speed follows the power received: on a grid that is too tight, recharging drags on.

In-game model

An animated model of the machine opens in game, in a window, step by step. Here is what it shows.

  1. Charger, model, step 1: Placing

    Step 1 · Placing

    One block, facing whoever places it. It recharges electric tools.

  2. Charger, model, step 2: Power

    Step 2 · Power

    A generator against it is enough. It draws power only while recharging: 50 kW.

  3. Charger, model, step 3: The tool

    Step 3 · The tool

    It takes electric tools (electric pickaxes, chainsaw, jetpack, headlamp), one at a time.

  4. Charger, model, step 4: Charging

    Step 4 · Charging

    The charge rises at the speed of the power received: on a tight network it drags.

  5. Charger, model, step 5: Output

    Step 5 · Output

    Once full, the tool moves right: a belt whose back touches it carries it off.

  6. Charger, model, step 6: Refused

    Step 6 · Refused

    An item that cannot charge stays on the belt and blocks the line: only tools get in.

  7. Charger, model, step 7: Stuck

    Step 7 · Stuck

    No output belt: the full tool stays left while the right slot is taken.

To open it in game:

  • Shift + right click the item in your inventory, then “See the model”.
  • The eye in the title bar of the machine's panel.
  • The command /maquette charger.

Placing and hookups

  • 1 block
  • A block. It shares power with the machines touching it, or receives a PylonPylon line.
  • A belt whose back touches it carries away the recharged tools.

Its panel

  • Production card: the TOOL slot, the charge gauge as a percentage and the CHARGED slot (a click takes it).
  • Controls card: “Load”, “Take” and “Slots”.
  • Hover the "?" button in the title bar to read the machine's help, and the gauge of the State card for the network details.

Crafting

Tips

Common mistakes